Effecss of preparation method on the properties of cobalt supported β-zeolite
catalysts
for Fischer-Tropsch synthesis
M. Nakanishi, Md. A. Uddin, Y. Kato, Y. Nishina, A. M. Hapipi: Catal. Today,
291 1 (2017), 124-132
Catalytic methanation of CO2 with NH3
Md. A, Uddin, Y. Honda, Y. Kato, K. Takagi, Catal. Today, 291 1 (2017),
24-28
Mutual Effect of Steedmaking Slag Layer Depth and Diameter on Alkali Elution
Rate
in Open Channnel Vessels with Straitened Seawater Flow
G. Takeuchi, H. Tamaki, Md. A. Uddin, Y. Kato, E. Kiso, K. Takahashi: J.
Sustain. Metall., 3 3 (2017), 459-468
Correlation between Liquid/liquid Mass Transfers in a Top/bottom Blowing
Converter
Y. Kawabe, Md. A. Uddin, Y. Kato, M. O. Seok, S. B. Lee: ISIJ INt., 57
2 (2017), 296-303
Effect of Particle Penetration Depth on Solid/liquid Mass Transfer Rate
by Particle Blowing Technique
T. Okuno, Md. A. Uddin, Y. Kato, S.B. Lee, Y.H. Kim: ISIJ Int., 57 11 (2017),
1903-1911
Chlorine removal from incinerator bottom ash by superheated steam
H. Suda, Md. A. Uddin, Y. Kato: Fuel, 184 (2016),753-760
Fluid mixing in ladle of RH degasser induced by down flow
K. Yoshitomi, M. Nagase, Md. A. Uddin, Y. Kato: ISIJ INt., 56 (2016), 1119-1123
機械攪拌時の固液間混合パターンとその液液系との比較,
Solid/liquid mixing pattern and its comparison with liquid/liquid one in
a machanically-stirred vessel
芝竜太郎, Md. Azhar Uddin, 加藤嘉英: 鉄と鋼, 102 (2016), 196-201
Fluid analysis of perfectly distinguished liquid/liquid flow in a mechanically-stirred
vessel with PIV
R. Tanaka, Md. A. Uddin, Y. Kato:CTSSC-EMI symposium, 55-63 (2015)
Characterization of Biochar from Pyrolysis of Rice Husk and Rice Straw
H.T. Phuong, M.A. Uddin, Y. Kato: Biobased Materials and Bioenergy, 9,
1-8 (2015)
Study on Reactivity of HgO over Activated Carbon with HCl and SO2 in the Presence of Moisture
S.Wu, M.A. Uddin, R. Katayama, E. Sasaoka, Z. Xie: Energy Fuels, 29 (10),
6598-6604 (2015)
Alkali Elution Behavior of Steelmaking Slag into Seawater by Continuouis
Stirred Tank Reactor
G. Takeuchi, Md. A. Uddin, Y. Kato and K. Takahashi: ISIJ Int.,55, 10, 2252-2257 (2015)
Effect of HF and HNO3 Concentration on Etching Rate of Each Component in Waste Crystalline
K. Takami, M. Kobashi, Y. Shiraga, Md. A. Uddin, Y. Kato and S. Wu: Mat.
Trans., Vol.56, No. 12 (2015)
Cold model study on mass transfer between different phases in a mechanically
stirred vessel
Y. Kato, S. Horiuchi, R. Shiba and Md. Azhar Uddin: 6th International Congress
on the Science and Technology of Steelmaking, 53-56 (2015)
Removal of elemental mercury with mixed metal oxide sorbents
from coal combustion flue gas and coal gasification fuel gas
M.A. Uddin, S. Inui, Y. Kato: International Conference on Coal Science
& Technology (2015)
Gas production by steam gasification of polypropylen/biomass waste composites
in a dual-bed reactor
E. Parparita, Md. A. Uddin, T. Watanabe, Y. Kato, J. Yanik, C. Vasile:
Journal of Master Cycles Waste Management, 17, 756-768 (2015)
Recovery of useful elements in crystalline silicon solar cell by chemical
etching
K.Takami, Md.Azhar Uddin and Y.Kato: PVSEC-23, 1-P-56(2013), (Taipei)
回分法による製鋼スラグから海水中へのアルカリ溶出挙動,
Alkali Elution Behavior of Steelmaking Slag into Seawater by Batch Test
H.Tamaki, Md. A. Uddin Y.Kato and K.Takahashi: 鉄と鋼Tetsu-to-Hagane, vol.99,
pp.676-682 (2013)
Adsorption and Desorption Behavior of Benzene on Activated Carbons
from Different Precursors in Dry and Humid Conditions
Veksha A., Md.A.Uddin and Y.Kato: J. Chem. Eng. Japan. vol.45 (2012), 387-394
Benzene adsorption from dry and humid air on activated carbons
from Japanese cypress wood prepared by CO2 and K2CO3 activation
Veksha A., Md.A.Uddin and Y.Kato: Int. J. Chem. Eng. Appl.3, 1-5 (2012)
混合ガス上吹き法による低炭素濃度域での溶鋼の脱炭およびマンガン蒸発,
Effect of Mixed Gas Top Blowing on Decarburization and Manganese Evaporation
of
Steel Melt in Low Carbon Content Range
加藤嘉英, 鈴木健史, 岸本康夫: 鉄と鋼Tetsu-to-Hagane, vol.97, pp.252-258 (2011)
Porosity development of the activated carbons from Japanese cypress
prepared by CO2 and K2CO3 activation and their benzene adsorption at low
concentrations
Veksha A., Md.A.Uddin, Y.Kato: 2nd International Conference on Chemical
Engineering and Applications/2011.11
Steam Reforming of Naphthalene as Model Biomass Tar over Iron-aluminum
and Iron-zirconium Oxide Catalyst
Noich,H.,Uddin M.A. and Sasaoka, E.: Fuel Processing Technology, vol.91,
pp.1609-1616 (2010)
Study of the Mercury Sorption Mechanism of Activated Carbon in Coal Combustion
Flue Gas
by the Temperature-Programmed Decomposition Desorption Technique
Murakami, A., Uddin,M.A., Ochiai,R., Sasaoka, E. and Wu, S.:Energy &
Fuels, vol.24(8), pp.4241-4249 (2010)